Fire Fighting Suit "GRISU PRO" EN 469
Mod.-Nr: 33-2109 Category: Turnout gearThe new lightweight "GRISU PRO"
GRISU - under this name ALWIT manufactures and distributes Personal Protective Equipment (PPE) for firefighters, independent of outer shell material, color, and location, size or kind of pockets, retroreflective or/ and fluorescent elements.
Developing GRISU the Basic Health and Safety Requirements of Annex II of Regulation (EU) 2016-425 have been taken into consideration. That concerns especially the choice of materials as well as the design of the garments. All these types of GRISU are designed according the basic and additional requirements of EN 469.
Developing GRISU the Basic Health and Safety Requirements of Annex II of Regulation (EU) 2016-425 have been taken into consideration. That concerns especially the choice of materials as well as the design of the garments. All these types of GRISU are designed according the basic and additional requirements of EN 469.
GRISU is intended to protect firefighters' body excluding head, hands, and feet, from the effects of heat and flame at firefighting.
Total weight: jacket 1,9 kg + trousers 1,3 kg
Outershell:
higher durability by 300% better tensile strength
even after 40 washes still compliant to EN 469 due to PowerShell finish
no need for re-impregnation
less pilling
less fading
Membrane:
para-aramide in 3D-structure
excellent thermal insulation
extreme low water vapour resistance
Inner-lining:
extremely lightweight
permanently hydrophilic by structure
no need for re-impregnation
| Application | fire fighting on and in buildings |
| Sizes | 1/S (46/48), 2/M (50/52), 3/L (54/56), 4/XL (58/60) , 5/XXL (62/64) |
| Total weight | 3,2 kg |
| Jacket | Mod. 33-2109 |
| closure by metal quick-release zipper | |
| covered by a wide flap with velcro closure | |
| bottom with additional snap fastener | |
| 1 radio pocket on the left upper front, | |
| separate yoke with inserted microphone-loops | |
| and velcro at both sides as well as a flashlight | |
| loop right | |
| 2 inserted side pockets with flap | |
| closed by velcro with opening tag | |
| loop with snap hook under the left pocket flap | |
| stand up collar with flap and velcro closure | |
| sleeves ergonomically tailored by parting seams | |
| hem of the sleeves edged | |
| sleeves adjustable by velcro-bar | |
| additional knitted cuff with thumb hole | |
| shoulders and back padded | |
| wicking barrier inside at the hem of sleeves and seam | |
| reflective trim | |
| (yellow/silver/yellow) 5 cm wide 2-ply at the seam | |
| and the sleeves | |
| 7,5 cm wide 2-ply vertically at front and back | |
| velcro for rear shield - if required | |
| Trousers | Mod. 33-2109 |
| front fly with zipper, covered by inclined flap with velcro | |
| elastic band in the back waist, waist adjustable by velcro-bar | |
| higher back part, padded, suspender reversible and additionally padded | |
| 2 side pockets, 2 pocket-reach-throughs | |
| 2 bellow-pockets with flap closed by velcro | |
| knife pocket with inclined opening on the right bellow pocket | |
| knee-reinforcement made of silicone coated para-aramide knitwear with additional padding made of para-aramide non-woven | |
| seams with dust-protection inside and outside | |
| the back with cut-out to avoid trapping | |
| reflective trim (yellow/silver/yellow) 7,5 cm wide around and vertical up to the knee-reinforcement | |
| revision opening by zipper at the left side seam | |
| repair opening at the back under the waistline | |
- 33-10_Grisu_Sucam (214.0 KiB)
