Coats EN ISO 11612
Mod.-Nr: 20-XXXX Category: Aluminized PPENo chance for radiant heat and molten metal.
Aluminized industrial PPE according to EN ISO 11612.
PPE made from aluminised materials are at first intended to protect against radiant heat and molten metal, but also against flames.
Outstanding features are:
• Highest level of protection through the use of para-Aramid
• light weight
• Soft and flexible, therefore comfortable
• Environmentally friendly (no use of solvents)
• economically
This PPE offers partial protection only; additional PPE might be necessary that shall have equivalent properties.
| Application | Short contact with open flame |
| Contact with splashes of molten iron and aluminium | |
| Protection against heat radiation | |
| Temperature range | Convective heat up to 80 kW/m² |
| Radiant heat up to 40 kW/m² | |
| Contact with hot surfaces up to 250°C | |
| Sizes | 1/S, 2/M, 3/L, 4/XL, 5/XXL |
| Mod. 20-0001 | Coat, RZ-closure in straight line of the front, small stand-up collar lined with felt, no pockets, air ventilation by overlapping rear |
| Mod. 20-0051 | as Mod. 20-0001, deviation: velcro closure |
| Mod. 20-0301 | Coat, freedom of movement by trapezoid pattern, RZ-closure diagonal on the right side of the front, small stand-up collar lined with felt, without pockets, air ventilation by divided overlapping rear |
| Mod. 20-0321 | Coat, freedom of movement by trapezoid pattern, hook/D-ring diagonal on the right side of the front, small stand-up collar lined with felt, without pockets, air ventilation by divided overlapping rear |
| Mod. 20-1202 | Coat, freedom of movement by trapezoid pattern, RZ + velcro closure diagonal on the right side of the front, small stand-up collar lined with felt, without pockets, air ventilation by divided overlapping rear |
| Mod. 20-2051 | Coat, velcro in straight line of the front, lined stand-up collar, no pockets, ventilated by divided overlapping armpits and rear |
| Mod. 20-2054 |
as Mod. 20-2051, deviation: partially reinforced, velcro for detachable
reinforcement |
| Mod. 20-2055 |
as Mod. 20-2051, deviation: with annexed hood
|
| Mod. 20-2251 |
as Mod. 20-2051, deviation: Velcro only partially
|
| Mod. 20-8169 | Coat, freedom of movement by trapezoid pattern, touch and close fastener diagonal on the right side of the front secured by rivets, small stand-up collar lined with felt, without pockets, back below the shoulders made of uncoated ComoTex, perforated hose guide for air ventilation, hose passage for ventilation system |
| Mod. 20-9351 | Coat, freedom of movement by trapezoid pattern, touch and close fastener diagonal on the right side of the front secured by rivets, small stand-up collar lined with felt, without pockets, air ventilation by divided overlapping rear |
| Mod. 20-9301 | as Mod. 20-9351, deviation: RZ-closures, double cuffs |
