Write us an eMail


or use our contact form

Please calculate 9 plus 8.

Fields marked with * are mandatory.

Service-Hotline

You can reach us by phone:

+49 2828 - 91 46 0

Coats EN ISO 11612

Mod.-Nr: 20-XXXX Category: Aluminized PPE

No chance for radiant heat and molten metal.

Aluminized industrial PPE according to EN ISO 11612.

PPE made from aluminised materials are at first intended to protect against radiant heat and molten metal, but also against flames.

 

Outstanding features are:

Highest level of protection through the use of para-Aramid

light weight

Soft and flexible, therefore comfortable

Environmentally friendly (no use of solvents)

economically

 

This PPE offers partial protection only; additional PPE might be necessary that shall have equivalent properties.

Mit * gekennzeichnete Felder sind Pflichtfelder.

Please add 8 and 4.
Application Short contact with open flame
  Contact with splashes of molten iron and aluminium
  Protection against heat radiation
   
Temperature range Convective heat up to 80 kW/m²
  Radiant heat up to 40 kW/m²
  Contact with hot surfaces up to 250°C
   
Sizes 1/S, 2/M, 3/L, 4/XL, 5/XXL

Mod. 20-0001 Coat, RZ-closure in straight line of the front, small stand-up collar lined with
felt, no pockets, air ventilation by overlapping rear
Mod. 20-0051 as Mod. 20-0001, deviation: velcro closure
 
Mod. 20-0301 Coat, freedom of movement by trapezoid pattern, RZ-closure diagonal on the right side of the front, small stand-up collar lined with felt, without pockets, air ventilation by divided overlapping rear
 
Mod. 20-0321 Coat, freedom of movement by trapezoid pattern, hook/D-ring diagonal on the right side of the front, small stand-up collar lined with felt, without pockets, air ventilation by divided overlapping rear
 
Mod. 20-1202 Coat, freedom of movement by trapezoid pattern, RZ + velcro closure diagonal on the right side of the front, small stand-up collar lined with felt, without pockets, air ventilation by divided overlapping rear
 
Mod. 20-2051 Coat, velcro in straight line of the front, lined stand-up collar, no pockets, ventilated by divided overlapping armpits and rear
Mod. 20-2054
as Mod. 20-2051, deviation: partially reinforced, velcro for detachable
reinforcement
Mod. 20-2055
as Mod. 20-2051, deviation: with annexed hood
Mod. 20-2251
as Mod. 20-2051, deviation: Velcro only partially
 
Mod. 20-8169 Coat, freedom of movement by trapezoid pattern, touch and close fastener diagonal on the right side of the front secured by rivets, small stand-up collar lined with felt, without pockets, back below the shoulders made of uncoated ComoTex, perforated hose guide for air ventilation, hose passage for ventilation system
 
Mod. 20-9351 Coat, freedom of movement by trapezoid pattern, touch and close fastener diagonal on the right side of the front secured by rivets, small stand-up collar lined with felt, without pockets,  air ventilation by divided overlapping rear
Mod. 20-9301 as Mod. 20-9351, deviation: RZ-closures, double cuffs